The Kyoritsu non-contact phase rotation indicator has a voltage range of 70V to 1000V. The unit requires no metal contact, ideal for safer and faster testing. Moreover, it is designed with a super bright mode that gives a clear indication even in bright sunlight. KEW8035 uses a combination of LED and audible tones to indicate phase direction. Green LEDs are used for clockwise direction with an intermittent tone. Red LEDs are used for anti-clockwise direction with a continuous tone It includes 9096 (carrying case), alkaline battery (LR6) x 4, and an instruction manual.
45Hz to 66Hz measuring frequency
Permits safe testing, without the need of direct contact between probes and live wires
Both old and new phase colourings to aid correct connections
The insulated crocodile clips can clip insulated cables from 2.4mm to 30mm
Double insulated cables, approximate length of 70cm
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
The instrument can be fixed to a metal panel via the magnet on the back side
Operating temperature ranges between -10°C and 50°C
Feed motors
Drives
Electrical systems
IEC61010-1
IEC61557-1, -7
CAT. III 1000V safety rated
属性 | 数值 |
---|---|
连接类型 | 鳄鱼夹 |
过电压类别 | CAT III 1000V, CAT IV 600V |
安全类别 | CAT III 1000 V, CAT IV 600 V |
非接触式 | Non Contact |
电池寿命 | 100 h |
电池类型 | AA |
电源 | 电池 |
尺寸 | 61 x 36 x 112mm |
重量 | 380g |
高度 | 112mm |
长度 | 61mm |
最大频率 | 66Hz |