3000 系列温度转换器
6mm 宽
24V 直流电源
DIN 导轨安装
Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.
Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.
Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.
A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.
All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.
属性 | 数值 |
---|---|
输入类型 | 温度 |
输出类型 | 电流 |
电源电压 | 16.8 → 31.2 V 直流 |
最低工作温度 | -25°C |
最高工作温度 | +70°C |
系列 | 3101 |