The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP, and accessory detection support, as well as Dead Battery support as defined in USB−C specifications. The FUSB303 features configurable address I2C access to support multiple ports per system or it can operate autonomously configured by just pins.
Fully Autonomous USB−C™ Port Controller
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins
客制化产品,不可取消或退货,遵循RS销售条款。
属性 | 数值 |
---|---|
电源开关类型 | USB |
最大工作电源电压 | 22 V |
输出数目 | 1 |
安装类型 | 贴片 |
封装类型 | QFN |
引脚数目 | 12 |
最高工作温度 | +85 °C |
最低工作温度 | -40 °C |
尺寸 | 1.65 x 1.65 x 0.35mm |